Anti-smog Electric Mask Air Purification Reusable Face Mask Breathable Filter G92E


SKU: 1005001361316555
  • Origin: CN(Origin)

OOTDTY100% brand new and high quality
Made of high-quality material, soft and comfortable, skin-friendly and breathable to wear.
Ergonomic design, well fit the face, let you breathe freely.
Four-layer high-efficiency filtration technology, creates a clean environment for you.
Anti-smog, anti-fog, anti-dust, anti-PM2.5 particles, anti-pollen and so on.
Replaceable filter design, this face mask can be washed and used for a long time.
Large wind suction volume, stable performance, ultra-low noise, long standby time.
There are 2 levels of air volume adjustment.When power is turned on, the default is the 1st level of air volume.Click the power switch again to turn on the 2nd level of air volume, and the third time is to turn off the power.
When the product is in use, the blue light is always on; when the blue light flashes, it means that the product has insufficient power, and the product needs to be charged. When connected to the power supply, the red light flashes, indicating that it is charging; the red light constant, indicating that the power is full.
Equipped with soft rubber lanyard, the elasticity of the soft rubber can make the product suitable for different people to wear and use, the face covering area is small, more beautiful and fashionable.
The case and face mask can be cleaned with dry cleaning agent or wiped with alcohol. The cushion soft rubber can be directly removed along the card position on the back of the case. After removing it, it can be directly rinsed with clean water, wiped with alcohol or placed in boiling water for sterilization. After the lanyard buckle is removed at the lanyard openings on both sides of the fuselage, the cleaning method is the same as above.

1.The filter element is a consumable item and needs to be replaced regularly. It can be used for 5-7 days when the PM2.5 value is around 200. (Note: The use time of the filter element depends on different use environments)
2.When replacing the filter element, first pull the two sides of the first layer of the mask hard and pull it apart, you can see the filter layer of the inner layer, and pull the two sides of the filter to pull it up, you can remove it.
3.In the process of using the product, determine whether the filter needs to be replaced. It can be determined by observing the degree of stain on the back of the filter. When the area of the stain is too large, please replace it in time.
4.Due to the characteristics of the filter material, please pay attention to waterproof when replacing and during use.
5.In the case of long-term non-use, it is recommended to remove the filter and seal it.

Item Type: Electric Mask
Material: silicone+ABS plastic
Size: 108x106x63mm/4.2×4.1×2.4in
Color: White
Rated voltage: 3.7V
Battery Capacity: 1400ma
Charging time: about 3-4 hours
Working time: about 16 hours
Rated power: 1 W
Wind Speed: 2 gears
Noise: 28-40dB
Working temperature: -19-60℃/-2.2-140℉
Cycle life: 0.5C, equal to and greater than 500 times
Charging rate: 1C-3C
Optional Type: A, B
Quantity: A: 1PC, B: 10PCS

Transition: 1cm=10mm=0.39inch
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Please be kindly noted,the listed product is produced and distributed abroad and subject to the laws of its country of origin.

Package Includes:(Optional)
Type A: 1 x Electric Mask
Type B: 10 x Filter


A, B